Guide-Line for the 3rd Analog VLSI Workshop
As the proceedings will be issued on "Camera Ready Manuscript" basis with
the size of 210mm by 298mm, you have to read the following guide-line
carefully before you make your camera-ready manuscript.
1. The total length of the paper should be within 6 pages.
USE PORTRAIT POSITION (putting shorter side horizontally)
2A. MARGINS for 8.5 x 11 inch paper shall be as follows
SIZE OF PAPER should be either 8.5 inch x 11inch or A4
and PRINT ONE SIDE OF PAPER ONLY.
TOP=0.8 inch (20mm), BOTTOM=1 inch (25mm)
2B. MARGINS for A4 paper
LEFT & RIGHT = 0.9 inch (23mm)
3. Style of your paper should be like an example
(A4 size) (U.S. Letter) attached.
The followings are required in the header of your paper accordingly.
A) TITLE (at center of the top line)
B) one blank line.
C) NAME OF THE AUTHORS AND AFFILIATIONS AT THE CENTER
D) one blank line
E) ABSTRACT ( 100 to 150 words )
F) one blank line
H) blank line(s)
4. TYPE SETTING FOR THE BODY OF PAPER
A) Double columns format with 0.4 inch or 10mm space between columns.
B) Line spacing is 5 to 5.4 lines per inch (14 or 13 points per inch).
C) Use 10 point size type, do not use fancy fonts.
D) You can attach any Figures, Graphs or Photos in any place of
the manuscript as far as they sit within the margins above.
Author(s) should send the manuscript(s) to the Secretariat by March 31, 1998.
Prof. Akira Hyogo
Department of Electrical Engineering,
Science University of Tokyo
2641 Yamazaki, Noda-shi,
Chiba, 278-8510, Japan
Go back to the Analog VLSI Workshop Homepage
Copyright (c) 1997-1999 by IEEJ